Crystal RS363SF X9, User Manual, Page: 13 / 30

RS363SF X9 User Guide
The image shown
may not depict the
product received.
Figure 2. Crystal Slides
Using Crystal Slides
To install the product with Crystal Slides in an equipment rack, complete the following
steps and see
Figure 2 below:
1. Loosen adjuster screws.
2. Line up the top and bottom holes on the front & rear mounting ears at the desired level
of the equipment rack, and attach to the rack using four (two per side) 10-32 x 0.50” rack
screws provided (see #1, #2, and #5 in Figure 2).
3. Tighten adjuster screws.
4. Line up the server side slots with the slides and gently push to install in the rack.
5. To secure the server when transporting or when extension of server is not necessary,
screw two 10-32 x 0.75” screws into the middle hole of the front bracket ears (see #1 and
#4) and through the middle holes in the front of the server.
ITEM DESCRIPTION
1
FRONT MOUNTING EAR, SLIDE
2 REAR MOUNTING EAR, SLIDE
3 GUIDEBAR, T-SLOT SLIDE
4 SCREW, PHIL TRUSS HEAD 10-32 X 0.75”
5 SCREW, PHIL TRUSS HEAD 10-32 X 0.50”
6 SCREW, 8-32 X 0.375” FHD 82D, SS
RS363SF X9 User Guide Page 11 of 26
Not all chassis support Crystal
Slides.
Table 3. Crystal Slides Parts List