12
H
ƯỚ
NG D
Ẫ
N S
Ử
D
Ụ
NG N
Ồ
I L
Ẩ
U
Đ
I
Ệ
N
Đ
A N
ĂNG
MS-30LT02-6
23.
Do not allow the product to dry burn, so as not to cause damage
or failure of the coating of the pot body or cause fire injury
accidents and property losses. Please confirm that there is a proper
amount of cold water in the pot before use.
24.
When using this product, the water quantity should not exceed
the maximum water level. If the water is too full, the boiling water
may spew out and cause danger or the water flows into the
temperature controller and lead to failure.
25.
After the work is completed, please pull out the power plug in
time, clean the product, wipe it dry and place it in a safe place.
When the gear switch is not closed, it is not timely to dial out the
power plug will make the product charged for a long time, the
product will enter a repeated dry burning protection and then dry
burning - and then protect to the reciprocating cycle, which will
greatly shorten the life of the product, and destroy the coating in
the heating plate, and may cause fire accidents;
26.
Do not plug/unplug the plug with wet hands or clean the socket
with wet cloth, otherwise it will cause electric shock;
27.
This product is only for indoor use, do not modify this product
without permission, in order to avoid danger;
28.
The surface of the appliance will become hot during use. The
temperature of the product surface is very high, so do not touch it
to avoid scalding.
OPERATING INSTRUCTIONS
INITIAL USE
To eliminate peculiar smell and smoke phenomenon for the first time,
please do following steps:
1.
Make sure that all packing materials have been removed
2.
Check if the cooker and cord are in good conditions
3.
Thoroughly clean cooking pot and the lid with little neutral
detergent and a non- abrasive sponge. Before cleaning, make sure