Crystal Vision
Specification
6 Specification
General
Dimensions 96mm x 325mm card with connector.
Weight 180g with no piggybacks fitted; 220g with two piggybacks fitted.
Power
consumption
TANDEM10-VF – 10 Watts.
3G-AIP2 – 2 Watts; 3G-AOP2 – 2 Watts; DIOP4 – 1 Watt.
FIP-VF – 0.6 Watts; FOP-VF – 0.6 Watts; FIO-VF – 1 Watt.
Inputs
Video HD or SD SDI 270 Mb/s to 2.970 Gb/s serial digital compliant to SMPTE
259, SMPTE 292-1 and SMPTE 424/425-A.
Cable Equalisation:
3G (2.970Gb/s) – 100 metres, Belden 1694A or equivalent.
HD (1.485Gb/s) – 140 metres, Belden 1694A or equivalent.
SD (270Mb/s) >250 metres, Belden 8281 or equivalent.
Automatic de-embedding to SMPTE 272M or SMPTE 299M.
LC optical input.
Video
standards
supported
1080p 50/59.94, 1080i 50/59.94, 720p 50/59.94, 1080psf 23.98/24,
PAL, NTSC.
Input format auto selected.
Audio Up to eight 24 bit stereo pairs (total of eight inputs and outputs). AES3
110 ohm or HiZ (balanced) D-Type, or AES3-id (unbalanced) 75 ohm
BNC.
Synchronous 48kHz audio to video.
Outputs
Video Serial output: 270Mb/s to 2.970Gb/s serial compliant to SMPTE 259,
SMPTE 292-1 and SMPTE 424/425-A.
Output follows the input format.
Audio is embedded to SMPTE 272M or SMPTE 299M.
LC optical outputs.
Audio Up to eight 24 bit stereo pairs (total of eight inputs and outputs).
AES: 110 ohm balanced D-Type or 75 ohm unbalanced BNC.
TANDEM10-VF User Manual R1.0
31
26 June 2017
