Crystal Vision
Rear modules and signal I/O
3 Rear modules and signal I/O
The Vision 3 frame will house up to 20 single height modules and dual power supplies or ten
double height modules. All modules can be plugged in and removed while the frame is
powered without damage.
Note:
For details of fitting rear connectors please refer to the appropriate frame manual.
The TANDEM10-VF can support the following rear modules:
VR02
,
VR12
, and
VR13
.
3.1 Rear module connections with VR02
The VR02 single-slot rear module allows
maximum packing density with the maximum
number of inputs and outputs available. The
VR02 has one 3G/HD/SD serial digital BNC
video input and three 3G/HD/SD serial digital
BNC video outputs. The D-Type connector
allows eight AES stereo pairs or eight mono
analogue channels as balanced I/O.
The 26-way high-density audio ‘D’ socket on
the VR02
module can be used for analogue
or digital, inputs or outputs – or a mixture of
both depending on the I/O piggybacks fitted.
Half of the I/O channels on the rear module
are connected to the front I/O (nearest
handle) piggyback position and the
remainder to the rear. The DIOP4 will
normally be configured as 110 ohm
balanced operation when using this rear
module.
Up to 20 VR02 rear modules can fit into a
Vision 3 frame.
VR02
3G/HD/SD serial
digital input
3G/HD/SD serial
digital outputs
Balanced AES or
analogue audio
I/O
TANDEM10-VF User Manual R1.0
8
26 June 2017
