
Crystal Vision
Using the front control panel
Audio menu
From the Home menu press F2 to enter the Audio Control menu. F1-4 selects further options.
Groups
This menu gives control of both the de-embedder and embedder configurations.
Menu
Comment
De-Embedder/
Embedder group
selection
The audio groups for de-embedding and embedding are selected
here. Press F1 to select this menu. Rotate SCROLL to find the
required de-embedder / embedder. Press F1 to select.
De-embedder A
group selection
To select a group to de-embed from the incoming video, press F1
and rotate SCROLL.
1, 2, 3, 4 or - none
De-embedder B
group selection
To select a group to de-embed from the incoming video, press F1
and rotate SCROLL.
1, 2, 3, 4 or - none
Embedder C group
selection
To select a group to embed to in the outgoing video, press F1 and
rotate SCROLL.
1, 2, 3, 4 or - none
= denotes a current selected group
Embedder D group
selection
To select a group to de-embed from the incoming video, press F1
and rotate SCROLL.
1, 2, 3, 4 or - none =
denotes a current selected group
HANC blanking
control
Setting the HANC control to ON will cause automatic blanking of
the HANC space before embedding
Note:
Embedders C and D cannot be made to embed to the same output group.
Audio Routing
At the heart of TANDEM HD-21 is the sixteen input, eight output routing matrix. This will
allow any of the sixteen possible inputs, eight embedded channels and up to eight analogue or
digital audio inputs to be routed to any of the eight outputs for embedding or to be output via
output sub-PCBs. The final configuration will depend on the number and type of sub PCBs
fitted.
Note:
Front and Rear describes the position of the sub-PCB when fitted to the TANDEM HD-21.
Front nearest the board edge controls and extraction handle. Rear nearest the board
connector.
Note:
If an output sub-PCB is fitted to the front position its output will always follow
embedder D routing. Similarly a rear fitted output sub-PCB will always follow
embedder C routing.
TANDEM HD-21 User Manual R1.6
32
12/11/2012