Crystal Vision
Control Descriptions
9 Control Descriptions
The controls of
SYN 3G/SYN A-3G
are accessible from the front panel, the board edge
or from Crystal Vision’s ‘VisionWeb’ software. The description of controls used in this
manual is based on VisionWeb GUI screen grabs but the path to locate controls via the
front panel or board edge follows the same logic. For instance, in the VisionWeb GUI
the input video ‘Frozen’ indicator is located in the ‘
Video Status/Input Video’
sub-
menus of the ‘
Status’
menu. To find the same control using the card edge or front
panel follow the path
Status->Video Status->Input Video
to the
Frozen
control.
VisionWeb GUI controls are accessed by menus at the bottom of the page which, when
selected, offer sub-menus containing a number of controls. Some controls are
simulated LEDs that are used to show status, others are check boxes, buttons or
sliders which change various
SYN 3G/SYN A-3G
settings.
The description of the menus are in the order shown in the GUI i.e.
VIDEO STATUS, AUDIO STATUS, SYNC AND OUTPUT SETTINGS, RGB PROC,
YUV PROC, FIBRE ENABLE, AUDIO OP ROUTER, AUDIO MUTE, AUDIO
RESAMPLING, AUDIO DELAY, AUDIO BYPASS, AFD, PRESETS, RESETS, GPO
ALARMS, ALARM DELAY TIME.
Each menu is shown with a screen grab and description of each control’s function.
Some menus and some controls are specific to specific models only, in this case the
model number(s) are indicated.
SYN 3G/SYN-A 3G User Manual R1.3
28
9 July 2019
