Crystal Vision
Hardware installation
20/09/05
6
DDAA246 User Manual V1.10
3 Hardware installation
The DDAA246 Serial Digital to Analogue Composite converter fits into all Crystal
Vision rack frames. All modules can be plugged in and removed while the frame is
powered without damage.
3.1 Universal rear connectors
When used with a single height rear connector, the 2U Indigo or FR2AV frame will house
up to 12 modules and dual power supplies, the 1U Indigo or FR1AV frame will house 6
modules and a single power supply. The 1U Desk Top Box has a built-in power supply
and will house up to 2 modules with a single height rear connector.
The 2U and 1U frames have a hinged front panel which gives access to the PSU and all
modules. The Desk Top Box has a removable front. The universal frame wiring system
allows any of the interface range of modules to be fitted in any position with the use of
removable rear modules.
The DDAA246 may be used with the RM01 single slot rear connector, the RM02
quadruple slot rear connector and the 18 double slot rear connectors.
Rear module connections with RM18
RM18 fits in all frames
Description
RM18
•
6 modules in 2U , 3 in 1U, 1 in a
DTB
•
1 module per rear connector
•
12 connections per module
available
•
Card fits in upper slot
•
No card fits in lower slot
BNC
Connection
SDI(A) IN
Channel A Serial Digital Input
SDI(A) OUT
Channel A Serial Digital Output
PAL/NTSC(A)
Channel A Composite Video Output
PAL/NTSC(B)
Channel B Composite Video Output
SDI(B) OUT
Channel B Serial Digital Output
SDI(B) IN
Channel B Serial Digital Input
