Crystal Vision
Hardware installation
13/01/05
11
DDAA132 User Manual R7.2
DTB-AV GPI connections
GPI lines ‘a’ to ‘f’ of each card connect to the rear remote connector as follows:
Slot no.
‘a’ pin
‘b’ pin
‘c’ pin
‘d’ pin
‘e’ pin
‘f’ pin
1
1
2
3
4
5
6
2
9
10
11
12
13
14
Note:
Remote connector is 15-way normal density D-Type socket. Frame ground is pin 15.
Indigo DT desk top box GPI connections
GPI lines ‘a’ to ‘f’ of each card connect to the rear remote connector as follows:
Slot no.
‘a’ pin
‘b’ pin
‘c’ pin
‘d’ pin
‘e’ pin
‘f’ pin
1
8 (1)
9 (1)
18 (1)
26 (1)
19 (2)
20 (2)
2
7 (1)
16 (1)
17 (1)
25 (1)
10 (2)
11 (2)
Table shows pin number (remote number)
Note:
Remote 1: 26-way high-density D-Type socket. Frame ground is pin 2 and +5V @500mA
is pin 1.
Remote 2: 26-way high-density D-Type plug. Frame ground is pin 6 and +5V @500mA is
pin 15.
2.3 Configuration
Jumper links are provided for the following settings:
•
PL8 – manual/AUTO standard selection
•
PL 3/4 and PL 5/6 – Y/C or composite selection for certain outputs
DDAA132 showing configuration jumpers
