Crystal Mountain Storm, Service Manual

Page: 12 / 33

3 - 4
16. Place fresh bottle outside of the cabinet.
17. Clean the outside of new bottle with a cloth (Figure 3-17). Remove security label/seal from the
bottle cap (if applicable).
18. Remove bottle adaptor assembly from the empty bottle, and set aside (Figure 3-18) .Carefully
un-package the Bottle Adaptor assembly (located in the bottle storage area), avoiding touching the
tube.
Note: to maintain sanitization of the system, refrain from touching the section of the bottle adaptor
tube that is inserted into the bottle.
19. Without touching the tube, install the Spike Cap (with the end of the tube in the Spike Cap) (Figure
3-19 and Figure 3-20 )
20. Push the tube to go through the Spike Cap, until it is close/hits bottom of the bottle (Figure 3-21)
Figure 3-19 Figure 3-20
Figure 3-17
Figure 3-18
Figure 3-21