Crystal Image Technologies KVM-2404QSS, User Manual, Page: 10 / 15

10
6. Installation
Step 1
– Power-On LCD Drawer
Warning:
Before attempting to connect anything to the Switch, or your computers, please ensure that all computer
equipment and devices are powered off.

Power-ON LCD Drawer, it would have a short beep-sound

LED-1 ON and Full-Screen LED ON at the front panel
Step 2
– Connecting (PC1) Computer to the KVM

Connect the USB2.0 A-to-B cable from USB port at KVM PC1 section to PC1
’
s USB2.0 port.

Connect the DVI cable from DVI port at KVM PC1 section to PC1
’
s DVI port.
(optional) Connect the audio cable from the headset (green) port at the KVM PC1 section to PC1’s audio output
(green) or line output (blue).
Step 3
– Power-Up PC1

Power up PC1
 Check for display and peripheral (keyboard/mouse) functionality
Step 4
– Power-Up PC 2, 3, and 4

Press the button 2 (LED2 would be lighten); turn on PC2
，
check its KB/MS functionality at PC2.

Then
，
press the button 3
，
power-up PC3, and check KB/MS functionality at PC3.

Finally
，
press the button 4, and power-up PC4, and check KB/MS functionality of PC4.
If you encounter an error, check your cable connections for that computer and reboot. If the problem persists, please
refer to the
Troubleshooting section in this User Manual.