CAUTION:
You should get a qualified person to drill and insert the mounting screws on the wall. DO
NOT do it yourself in order to avoid any unexpected damage to the equipment or injury
to personnel.
Make sure to prevent the main unit from falling when mounting it on the wall.
Before mounting, check the wall strength. (Do not put on a veneer plaster or
whitewashed wall. The main unit may fall). If it is not clear, consult with a qualified
service technician.
Mount the main unit on the wall with supplied screws and wall mount kits.
1. Use the marks on this page, ensure the guide is leveled and drill eight properly sized holes for the MOLLY
SCREWS.
2. Insert the MOLLY SCREWS 8pcs into the holes and screw into the wall.
3. Align WALL MOUNT KIT (2pcs) over the newly drilled holes. Insert the SCREWS 8pcs over the wall mount kit into
the MOLLY SCREWS.
4. Hook the main unit on the hanger of the WALL MOUNT KIT by using the opening in the mounting bracket at the
back of the unit. Slowly release your hands and make sure there is a firm fit.
WALL MOUNT GUIDE
