14
CRYSTAL
ACOUSTICS
Scan Storage
Select the mode in which the attached USB
media is scanned.
Resume Play
Activate or de-activate the AppStreamer’s
ability to resume playback from the point you
stopped watching a movie.
Format:
Erase all data on the attached stor-
age media.
Blu-ray Navigation:
Select whether the Blu-
ray (ISO) menu will appear.
Auto Standby:
Set the minutes after which
the AppStreamer will automatically pass into
standby mode, if idle. This is especially useful
in case you forget to shut it down yourself.
Auto Play by booting:
Set the AppStreamer
to automatically play a pre-selected set of
video, picture or music files, on startup.
To activate this feature, first create a folder
named “Autoplay”.
In this folder,
create three sub-folders
named “
movie
”, “
music
” and “
photo
”.
Next, copy the desired files in the appropriate
folders (depending on kind)
From the menu, select “Movies”, “Music” or “Photo”.
Factory Default:
Reset the AppStreamer to
its factory settings.
3.8.2 Sound
Night mode
Define the level of dynamic range compression
Activate this setting (“ON”) to enjoy movies
even at late night hours, without disturbing
your neighbors.
Key tone
Activate an audible effect for every key press.
If you set this option to ON, you will hear an
audible “click” with every command input from
the remote control.
HDMI-OUT
Set whether you wish the HDMI’s audio-out to
be Linear PCM or RAW
•
PCM:
Select this for stereo PCM output
only, regardless of audio signal (5.1 audio will
be converted to stereo)
•
RAW:
Select this for direct digital audio-out
of all stereo and multichannel audio. If you are
using the AppStreamer with an A/V Receiver,
Home Cinema system or other gear with AC3
and DTS decoders, this is the optimal setting.
SPDIF OUT
Set whether you wish the SPDIF’s audio-out to
be Linear PCM or RAW
•
PCM:
Select this for stereo PCM output
only, regardless of audio signal (5.1 audio will
be converted to stereo)
•
RAW:
Select this for direct digital audio-out
of all stereo and multichannel audio. If you are
using the AppStreamer with an A/V Receiver,
Home Cinema system or other gear with AC3
and DTS decoders, this is the optimal setting.
DBSS
Select between 5.1 or High Definition audio.
Lip Sync
Change the synchronization between video
and audio.
3.8.3 Video
Aspect Ratio
Select the desired picture aspect
You can set between Pan Scan 4:3, Letter
Box 4:3, 16:9 and 16:10, depending on your
display or projector.
