CryptOn DX260, Equipment Manual

Page: 8 / 24

8
Operation
WARMING-UP
Switch on power to the base unit. The ‘Power On’ light will illuminate.
There is a warm-up time of 5 to 15 minutes dependent on the outside temperature. During
this time the Smokemeter will not function.
NOTE:
For details of software controlled procedures, refer to the appropriate software
manual.
WIRELESS SMOKEHEAD OPERATION (DX260-1BT)
For wireless systems the operation of the equipment is identical to the cabled
systems but a wireless Smokehead (DX260-1BT) is utilised.
When the equipment is first
switched on the smokehead
should be firmly positioned onto its
charging cradle and the unit should
be allowed to charge for a
minimum of five to six hours (or
preferably left overnight) to fully
charge the batteries.
The equipment screen will prompt
the user to return the smokehead to
its charging cradle between tests.
This must be obeyed in order to
proceed further. Failure to return the
smokehead to its base will result in
a depletion of the battery charge.
The test will not continue until the
smokehead has been returned.
Blue flashing LED indicates
battery charging operation
Ensure the Smokehead
is firmly positioned on its
charger base