43
2.3 Rear Panel
3 Hardware Installation Procedure
ñ Attach the Antenna at the Rear Panel of your Wireless Router.
ñ Connect the WAN port of the Wireless Router with the LAN port of an ADSL
modem or a hub/switch.
ñ W
Wiirre
ed
d cco
on
nn
ne
eccttiio
on
nss.. Connect devices to the LAN ports of the Wireless Router.
You can connect the Wireless Router to the Ethernet Adapter of your PC
directly, using an RJ-45 Ethernet Cable. Or, you can connect a Hub/Switch to
a LAN port of the router.
ñ Plug the Wireless Router to a power supply socket.
ñ W
Wiirre
elle
essss cco
on
nn
ne
eccttiio
on
nss.. Install a Wireless Ethernet Adapter such as the Crypto
WP 100E Wireless PCI Card at your PC. Configure the WP 100E and connect to
the Wireless Router wirelessly.
P
Po
orrtt//B
Bu
utttto
on
n
FFu
un
nccttiio
on
n
LAN (1/2/3/4)
Connect the router to your PC's Ethernet port, or to the
uplink port on your hub/switch, using a RJ-45 cable
WAN
Connect to DSL or cable MODEM
RESET
Press instantly to reboot the device.
Press and hold for more than 4 seconds to restore the
factory settings.
AC 9V
Connect to the supplied power adapter
wr100manual 5/16/06 11:41 AM Σελίδα 43
