Rev. 3.1
Page 16
Simple and Smart
iMINI User Guide
sImportantsNotes:s
Sometimes, even with a properly working logger, the battery icon is displayed when connected to ConsolePlus.
Under these circumstances, unplug iMINI and wait a few seconds to refresh the battery status. If battery is
genuinely low, the battery icon will remain on the LCD display. Otherwise, the battery icon will disappear.
If battery is removed from a iMINI when logging, logger will stop logging.
Consequences:
If the iMINI is logging with a low battery, there are high possibilities of logger’s memory corruption and crucial data loss.
During logging, if the battery gets low, the writing of memory address can fail, which results in memory corruption. Logger
may no longer be detectable with ConsolePlus software or, if detected may not be able to program it.
Ease:s
You have the ability to change your iMINI’s battery. To replace your logger’s battery, please follow the procedure below.
Procedure:s
1.
Purchase a PANASONIC coin battery CR2450 3.0V (can be purchased through your CVT distributor or local
electronics store).
2.
Remove battery cover located on the rear of your iMINI logger with the help of a coin, turning it counter-clockwise.
3.
Pry out the battery carefully from battery compartment.
4.
Short the battery terminals with the help of screwdriver or with tweezers for 30 seconds.
5.
Insert the new battery in the compartment ensuring correct direction. The positive terminal of the battery is always on
top side and negative at bottom.
6.
Replace the battery cover by matching two marks, one on the rear of the iMINI and other on the battery cover and
turning it clockwise.
Battery replacement
