Crye Precision LRB LEG LOOPS, Operator'S Manual

Page: 3 / 20

This manual must be carefully read by all persons who have or will have the
responsibility for using or maintaining this product.
Any warranties made by Crye Precision LLC with respect to this product are voided if the
product is not used and maintained in accordance with the instructions in this manual.
For any questions relative to the use or repair of this product, please write Crye Precision
LLC or call
1-718-246-3838 during regular business hours.
The following are safety warnings intended to call attention to fundamental performance
limitations and areas of the product where proper usage must be followed. Failure to use and maintain
the product according to the warnings contained herein may result in the product failing to
perform as designed, and/or the persons relying on this product sustaining serious personal injury
and/or death.
• Refer to the product label and manual for
load rating and use guidelines.
• The safety belt worn in conjunction with the
lanyard is intended only to prevent the user from
reaching a position where a fall can occur.
• The Crye Precision LRB must be worn in
conjunction with the Crye Precision LRB Leg
Loops for mountaineering, rappelling, and fall
arrest.
• The Crye Precision LRB Leg Loops must be worn
in conjunction with the Crye Precision LRB.
• Avoid repeated exposure of fall-protection
devices to salt water, solvents, or chemicals. See
care instructions.
• Fall-protection devices that show no signs of
damage must be replaced 5 years from date of
purchase.
• This fall-protection device is not flame resistant.
• Perform periodic inspections of the hardware,
webbing, and stitching of the fall-protection
device. Discontinue use of damaged fall-
protection devices immediately.
• DO NOT machine wash or dry clean the
product. Exposure to detergents, bleach, or
solvents may result in degradation and reduce
the effectiveness of the product.
• Inspect the product for discoloration, cuts,
tears, abrasions or cracks before and after each
use.
• DO NOT alter the product in any way.
• DO NOT expose the product to open flame or
excessive heat.
• All replacement parts must be acquired from
Crye Precision LLC or a licensed distributor.
• The most current version of this manual may be
found at www.cryeprecision.com.
• DO NOT use this product except in its intended
manner.