CODING THE VEHICLE
In order to activate the Rear-View Camera feature, the installer must CODE the car rst.
Step 6
- With the T-Harness and interface module properly connected, turn the ignition to the “ON” position.
Wait for the head unit to power on then proceed to the following steps.
On the left side of the steering wheel:
1. Press and Hold both the “Hash Key”
and “Answer” buttons for 10 approx.
10 seconds.
During the coding process, the Red
and Blue LED will begin
h.
2. After the head unit has began to reset,
release both buttons.
The Red and Blue LED’s will glow solid
to identify the coding has been
completed.
Step 7
- With the interface coding successful, you will be able to enter the menu structure and see “Rear-View Camera” in the menu structure.
HASH KEY/ MODE
ANSWER
REAR-VIEW CAMERA
Rear-View Integration Interface for
PORSCHE Vehicles with PCM-3 or PCM-3.1 Systems
PCM-3
R
INTERFACING SOLUTIONS
Sightline
REAR-VIEW INTEGRATION
Crux Interfacing Solutions • 6860 Canby
Ave., Suite 1
16, Reseda, C
A 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www
.cruxinterfacing.com
6 of 10
rev.051718
