UP=ON
DOWN=OFF
INTERFACING SOLUTIONS
RVCCH-75B
REAR-VIEW & FRONT-VIEW CAMERA
INTEGRATION INTERFACE FOR
DODGE & JEEP VEHICLES 2014-UP
www.cruxinterfacing.com
Rev. 051016
4
CONNECTING THE INTERFACE
Follow these steps to properly install the CAN module
Step 3
- Connect both the 8-Pin and 12-Pin connectors to their corresponding interface.
The 8-PIn is the only one with dip switches. Make sure all your connections are firmly inserted.
Step 4
- After connecting the module, set dip switches number “2”, “4”, and “6” to the “ON” position.
Make sure to test Front and Rear inputs.
All other dip switches are not to be used.
DIP SWITCH DESCRIPTION
IF NOT USING THE INPUT, PLACE TO OFF
DIP 1 =
ON = Video In-Motion Enable
DIP 2 =
ON = Rear-View Camera Enable
DIP 3 =
Not Used
DIP 4 =
ON = Front-View Button Activation
DIP 5 =
Not Used
DIP 6 =
CAN Termination
After each change of the DIP switch settings,
we recommend powering down the module,
then restarting the vehicle.
LED INDICATORS
BLUE LED:
SOLID = BUS RECOGNIZED
BLINKING = NO BUS DETECT
The Blue LED will shut off when
car enters sleep mode.
LED INDICATORS
RED LED:
ON = Power On
OFF = Power OFF
