PAS SETUP: Adjusting the position of the parking guide line
<H-POSITION>
<V-POSITION>
REAR TYPE: Select Rear Camera Recognition
-
CAN: By connecting “CAN” cable of the rear car gear. Changing to rear camera mode when
shifting into reverse. (Connect “CAN” wire of the power cable to the “CAN” cable of car gear)
-LAMP: By connecting to the reverse light of the vehicle. Switch camera mode when shifting to
reverse gear. (Connect “Rear
-
C” wire of the power cable to the reverse light wire)
SAFE ENABLE:
If enabled, HDMI, RGB, and A/V mode will be disabled while driving. (Default is OFF)
RADAR ENABLE:
Setting parking distance alarm sensor (ON/OFF).
NAVIGATION AND CAR MODEL SET UP
rev.083017
5 / 7
NAVI MODEL:
Setting for RGB navigation
(Default, Q-roi RGB, WP9230, HDMI (WVGA)
HDMI MODEL:
Setting for HDMI Navigation
(Q-roi RGB, WP9230, HDMI, PAPAGO)
CAR MODEL:
Select car model
(TYPE1, TYPE2)
AV OUT SELECT:
Select background sound through car
AUX, HDMI1, HDMI2, AV)
MODE BUTTON:
Select mode button
(NAVI, HOME)
(only 8” monitor is
supported)
FACM FUNC:
ON = Use front camera
OFF = Do not use front camera
rev.031918
4 / 9
Summary of Contents for MRVLR-68Q
Page 2: ...rev 031918 2 9...