background image

Smart-Play

Power/Video Harness 

USB Extension Cable

Microphone

ACPBM-77Y

Smart-Play Integration with Rear-View Camera Input for

E & F Series BMW Vehicles with CIC Infotainment Systems

R

INTERFACING SOLUTIONS

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA  91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.072419

1 of 13

-  Smart-Play Integration system allows connection of Android and other devices to the iDrive infotainment system.

-  Control Apps using smartphone’s voice control feature or the factory iDrive Knob.

-  Adds aftermarket rear view camera input.

-  Picture-in-picture mode combining after-market rear-view picture with factory parking sensor graphics.

-  Built-in on-screen display and setup.

-  1 trigger output (+12V max. 1A) for the camera power.

 

*NOTE: Android Phones must have a firmware version of 8 and above.

PRODUCT FEATURES:

PARTS INCLUDED:

ACPBM-77Y Module

Power/CAN Harness 1 (E-Series)

Power/CAN Harness 2 (F-series)

 

ACPBM-77Y Vehicle Harness

3.5mm to RCA Adapter

Smart-Play Interface Module

NOTE:

This kit has two seperate POWER/CAN harnesses. Only use the harness that’s designed for your 

vehicle.

POWER/CAN 1 - E-Series Trims

POWER/CAN 2 - F-Series Trims

LVDS 1 Cable (to vehicle)

LVDS 2 Cable (to radio)

Summary of Contents for Logic ACPBM-77Y














Reviews: