4.
Run the cable to where the BTI-ISO module will be installed. It can be mounted behind the radio or
behind the glove box.
5.
Plug the microphone, speaker and ISO harness to the module.
6.
Remove the radio and unplug the ISO connectors from behind the radio.
7.
Plug the male ISO connectors of the ISO Harness to the back of the radio.
8.
Plug the OEM ISO connectors to the female ISO connectors of the ISO harness.
9.
Reinstall the radio back into the dashboard.
1.
Turn the Bluetooth function on the phone.
2.
Place the phone close to the BTI-ISO module (at least 3 feet or closer).
3.
Turn the vehicle key to ACC.
4.
Wait for your phone to show the BTI-ISO and pair to it.
5.
When the pairing is complete, BTI-
ISO will show “Connected” on the list of Bluetooth devices.
PAIRING TO A SECOND PHONE:
1.
Once the BTI-ISO is paired to the first phone, turn OFF the Bluetooth function on the first paired phone.
2.
Pair the second phone following steps 1 to 5 above.
3.
Turn ON Bluetooth function on the first phone.
4.
Cycle the vehicle key, from ACC to OFF then back to ACC and wait for the radio to boot. Both phones will
now be connected to the BTI-ISO.
5.
If a call is received on the first phone that was paired, the BTI-ISO will automatically connect to the first
phone. If a call is received on the second phone, the BTI-ISO will automatically connect to the second
phone.
The BTI-ISO will automatically reconnect to the first phone that was paired when the vehicle is turned on. If it
does not connect, press and hold the middle button on the remote control for more than 2 seconds to
manually connect.
To delete all paired phones from the BTI-ISO, press and hold the and VOLUME - simultaneously for
5 seconds. All paired phones will be deleted.
FUNCTION
BUTTON
Answer Call
Press middle button to accept call
Answer a second call
Press
“hold and answer” button on your phone
Call reject
Press the middle button twice
End a call
Press middle button once
Voice Dial
Press both Vol + and Vol - once at the same time
Last outgoing number redial
Press the middle button twice
Reset/Remove the pairing history
Press and hold the middle and Vol + at the same time
Call transfer
During a call, press the middle button twice
2 / 3
rev.05152019
