Installation Kit
120 90-3044P
Spacers
(supplied with
your order)
1.
Press posts on
trimplate
into holes on
kit frame
to
snap parts together and secure (Figure 1).
2.
Push clips on
support tray
into slots on rear of kit frame
to secure (Figure 1).
3.
Cut off tabs on both mounting brackets labeled
“A”
or
“B”
that are shown as shaded (Figure 2). The
“C”
tabs should be
the only remaining tabs.
4.
Secure side
mounting brackets
to kit assembly with
studs
and
nuts
supplied (Figure 1).
5.
Choose the proper
spacers
(supplied with your order) to
allow receiver nosepiece to extend 1/8” to 1/4” beyond
face of trimplate (Figure 3).
6.
Insert receiver shafts (with spacers in place) through
openings in trimplate. Secure receiver and
faceplate
with
shaftnuts
supplied with receiver.
7.
Attach
control knobs
.
1/8” -1/4”
▲
▲
Spacer
Shaft Receiver Assembly
3
FIGURE 3
Shaftnuts
®
Copyright 2003 Crutchfield Corporation
FIGURE 1
Trimplate
Kit Frame
Support Tray
Mounting Bracket
Mounting Bracket
Faceplate
Control Knobs
Stud
Nut
Chevrolet/GMC
Tools Required
▲
3/8” Socket
Deep Socket
(size depends upon receiver)
FIGURE 2
Cut off A & B
(shaded tabs)
on both brackets
These “C” tabs must remain
Hacksaw
