5
000SPKRIG
Rear Deck Speakers
Installing rear deck speakers presents many of the same challenges as
door speakers. In many cases the grilles on the rear deck can be easily
pried up or unscrewed. Other times, they can be removed from underneath,
via the trunk.
In some cars, however, the entire rear deck panel must be removed to access
the speakers. Often, this means removing the rear seat to access the deck
panel. (Some seats are bolted in place, while others pop in and out.) With
the seat out, you should be able to pry up the rear deck and work with the
speaker openings in the same fashion as door or dash mounting locations.
A look at a typical rear deck
speaker installation.
®
Copyright 2005 Crutchfield Corporation
✔
Check that wires do not interfere with window operation.
✔
Test window and door lock operation.
✔
Make sure seats and seat belts are secured to
manufacturer's specifications.
✔
Check brake light wiring connection and test operation.
SAFETY CHECK
!
Tech Tips
•Speakers are classified as a fit if they meet the size and shape of the factory
speaker opening. Speaker screw holes may not line up exactly with factory
holes. A mounting bracket or drilling may be required to match screw hole
patterns.
•Select Infinity speakers are supplied with a metal mounting bracket. In some
vehicles, the metal bracket must be used along with mounting brackets that
Crutchfield supplies.
•if using a supplied speaker mounting bracket, speed clips will need to be
used to mount the speaker to the bracket. This is done by spreading the clips
apart and sliding them over the screw holes on the bracket. The clips provide
a thread for the screws to go into.
