13
Charge the battery at room temperature (approx. 20 ° C). Always keep a charged battery
(e-bike) under charge when charging.
Charging the battery in temperatures below 10 ° C and above 40 ° C can cause serious dam-
age to the battery. Use only the charger that came with your e-bike to charge the battery.
The battery is sensitive to precise charging, using another charger may damage the battery
or other parts of the e-bike.
In the event of damage to the charger or power cord, never connect to the electrical socket.
Always switch off the battery and the e-bike system before charging!
FACTORS AFFECTING THE RANGE OF THE ELECTRIC BIKE
The range of the e-bike cannot be precisely determined because it is influenced by many factors.
1. Route profile and surface:
the range is higher in flat terrain, than when driving on long steep
climbs and worse surfaces.
2. Weight of driver and load:
higher weight of driver and load means higher energy consumption.
3. Inflation and tread pattern:
it is important to inflate the tires correctly. Riding underinflated
tires reduces the range of the e-bike.
4. Battery status:
A fully charged new battery has a longer range than a battery that has been
charged and discharged many times. The range is also affected by the battery capacity. Higher
capacity = higher range. The maximum battery capacity is reached after 5-10 charges.
5. Assistance mode:
higher motor assistance means lower range.
6. Driving style and smoothness:
if you pedal a lot, the engine consumes less energy. The smoo-
thness of the ride also has an effect, as frequent starting reduces the range.
7. Weather conditions:
the ideal temperature is around 20 ° C and no wind. If the temperature is
lower and a strong headwind blows, the range decreases.
ELECTRIC BIKE CONTROL (COLOR LCD DISPLAY)
OLI control panel with high contrast LCD display. It provides all important information, which it easily
displays even in direct sunlight. The handlebar controls provide good feedback and ease of use. The
user interface is clearly readable and intuitive. The control panel and display are protected against
ingress of water and dirt. It complies with protection class IP 65. The system must be switched on
when the e-bike is stationary (if the e-bike is not moving). If the system is switched on while riding,
the assistance may not work. The assistance is then switched on when the e-bike is stopped and
start move again.