background image

 

 

Rear rack battery 

 

To turn the battery on or off, press the red button at the bottom. Black button placed under lighting has 
no function. The battery indicator is located on the top of the battery. Press the button to view battery 
capacity information. If 5 LEDs are lit simultaneously (4 green LEDs and 1 red), the battery capacity is 
100 - 80%, if 4 diodes are lit (3 diodes green and 1 red), the battery is charged to 80 - 60%, if 3 diodes 
are lit (2 diodes green and 1 red), the battery capacity is 60 - 40%, if 2 LEDs are lit (1 LED green and 1 
red),  the  battery  capacity  is  40  -  20%.  If  1  LED  is  red,  the  capacity  is  less  than  20%.  The  battery 
charge status display on the control panel is for reference only. If the engine stops running smoothly 
and  runs  intermittently,  the  battery  capacity  is  too  low.  In  this  case,  it  is  necessary  to  switch  off  the 
electric drive system. Continue riding without engine assistance and charge the battery. 

 

 

The display of the battery charge status on the LED panel is for guidance only. In 
case  of  excessive  use,  the  battery  overheats  and  automatically  shuts  off.  The 
battery  is  protected  by  a  temperature  sensor.  Once  the  battery  has  cooled  to 
operating temperature, it is possible to continue riding. Heating up the battery is a 
common  phenomenon  related  to  its  operation.  If  you  leave  the  e-bike  in  a  public 
place,  we  recommend  locking  the  battery  with  a  key.  We  recommend  separating 
the battery keys, just in case a losing the key, do not carry them all on one bundle. 
Before each ride, please make sure that the battery is properly seated and locked. 
To unlock the battery, turn the key to the right to lock by snapping the battery into 
the frame. 

Summary of Contents for e-City 1.13















Reviews: