Nasaďte přední kolo do vidlice
Nasaďte rameno brzdy na brzdovou čelist
Step 13.
Step 14.
Step 15.
Step 16.
Step 17.
Step 18.
www.kickscooters-crussis.eu
Remove the plastic stopper from between
the brake pads. ATTENTION! DO NOT PRESS
BRAKE LEVER UNTIL YOU PUT
THE WHEEL BACK ON!
Put from wheel back on,
tighten quick release.
Mind the direction of the wheel
Correct position of the quick release axle
to the fork after tightening
Stem and front wheel must form a single axis.
Make sure that stem is properly tightened
with force 4 NM
Check the slope of the handlebars
so it will suit the angle of the brake levers.
We recommend setting at 45 degrees
We wish you many happy kilometers
on your new
kick scooter CRUSSIS!
