Crunch CRXR Operator'S Manual Download Page 8 | Manualshive

Page: 8 / 8

Crunch CRXR Operator'S Manual Download Page 8

Crunch products are designed and engineered in the USA by

www.maxxsonics.com

CR CRXR QSG 01 - rev1

WARRANTY

Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from

defects in material and workmanship for a period of one (1) year from the date of purchase.

Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty

period. Components that prove to be defective in materials and workmanship under proper installation

and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was

purchased. A photocopy of the original receipt must accompany the product being returned. The

costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics

USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or

consequential damages connected therewith. To view the full warranty, please visit the website.

CRUNCHCARAUDIO.COM

«
...
6
7
8

Summary of Contents for CRXR









Reviews:

No comments