8
Highway/city mode selection
Press the
CITY
button repeatedly for less than two seconds
each time to toggle through four signal sensitivity modes.
They are: Highway1(H1) - Highway2(H2) - City1(C1) -
City2(C2). The factory default mode is H1. H2 is activated
with one beep, C1with two, C2 with three, and H1 is reset with
four beeps.
The detector detects all radar band (X, K, Ka) signals at
H1and C1, while it detects only K and Ka band signals at H2
and C2. Also, it detects with full sensitivities in both highway
modes and with reduced sensitivities in both city modes. It
detects laser signals at all times regardless of these highway
and city modes.
See following illustrations:
Highway mode 1 Highway mode 2
City mode 1
City mode 2
X-band, occupied by police radar, is also shared for other
uses, such as automatic door openers like the ones used at
supermarkets, burglar alarms, terrestrial microwave
emission, RF braking systems, and other devices. In addition,
other radar detectors in close proximity may falsely alert your
detector.
Compass Calibration
Press and hold the CALIBRATE button (= CITY button) for
more than 2 seconds to access compass calibration mode.
The calibration mode starts with one beep. The detector
С 2
C
Н
2
Н
130.com.ua
Autogood products «130»
