4-11
48 Cantius
Basic Systems Operation
SHORE POWER
RETRACT
Put the breaker in the ON position to connect power to the dockside retract motor. The motor can be controlled
to extend or retract the dockside cable by either a remote control or by switches mounted under a step near the
entrance of the cable to the yacht.
SPARE / CKPT
WASHDOWN
Put the breaker in the ON position to turn on the cockpit washdown, if equipped. If not equipped with a
washdown, this breaker is a spare for future use.
SPARE
This breaker is a spare for future use.
MAIN & BRIDGE
Put the breaker in the ON position to connect power to breakers listed under MAIN & BRIDGE.
TV ANTENNA
Put the breaker in the ON position to connect power to the TV antenna amplifier.
COCKPIT STEREO /
DVD
Put the breaker in the ON position to connect power to the cockpit stereo and the DVD player.
MSR STEREO / DVD Put the breaker in the ON position to connect power to the master stateroom stereo and the DVD player.
FSR DVD
Put the breaker in the ON position to connect power to the forward stateroom DVD player.
SATELLITE
ANTENNA
Put the breaker in the ON position to connect power to the satellite antenna.
CKPT MEMORY
STEREO / DVD
This breaker connects power to the cockpit stereo and DVD player settings. The breaker is connected to the
+12-volt house battery switch, bypassing the DC MAIN circuit breaker to maintain memory of settings. Reset
this breaker immediately if it is tripped.
MSR STEREO / DVD This breaker connects power to the master stateroom stereo and DVD player settings. The breaker is
connected to the +12-volt house battery switch, bypassing the DC MAIN circuit breaker to maintain memory of
settings. Reset this breaker immediately if it is tripped.
CO DETECTORS
This breaker connects power to the CO detectors. The breaker is connected to the +12-volt house battery
switch, bypassing the DC MAIN circuit breaker for continuous CO detection. Reset this breaker immediately if
it is tripped.
PANEL LTS /
METERING
This breaker connects power to the panel lights and metering. The breaker is connected to the +12-volt house
battery switch, bypassing the DC MAIN circuit breaker for continuous panel light settings and metering of panel
components. Reset this breaker immediately if it is tripped.
DC Circuit Breaker
Function
Downloaded
from
CruisersOwnersForum
http://www.CruisersOwnersForum.com