4-11
45 Cantius
Basic Systems Operation
DC Panel Circuit Breaker Functions
DC Circuit Breaker
Function
DC MAIN
Put the breaker in the ON position to connect power to the rest of the circuit breakers on the panel except the
bilge pumps and the CO detectors. The automatic bilge pump circuit breakers are mounted on the AUTOMATIC
BILGE PUMP C.B. PANEL located in the engine room. If any of the breakers are tripped and the white button
popped out, reset them immediately. The STEREO MEM, SHOWER SUMPS and CO DETECTORS circuit
breakers are connected to +12V DC, which is switched ON and OFF at the house battery switch. The CO
DETECTORS and SHOWER SUMPS circuit breakers should be reset immediately if they are tripped.
CAUTION: If the house battery switch is OFF, the CO detectors are NOT ACTIVE. There is no CO
detector warning if the house battery switch is OFF.
HELM MAIN
Put the breaker in the ON position to connect power to the helm main circuit breaker panel located beneath the helm.
LIGHTS HALL /
STEPS
Put the breaker in the ON position to connect power to the stairway and hallway lights.
LIGHTS GALLEY
Put the breaker in the ON position to connect power to the galley lights.
LIGHTS PORT HEAD
Put the breaker in the ON position to connect power to the port head lights.
LIGHTS STB HEAD
Put the breaker in the ON position to connect power to the starboard head lights.
PUMP PORT HEAD
Put the breakers in the ON position to connect power to the forward head pump. Power to the pumps must be ON or the
electrically controlled VacuFlush heads will not flush.
PUMP STBD HEAD
Put the breakers in the ON position to connect power to the forward head pump. Power to the pumps must be ON or the
electrically controlled VacuFlush heads will not flush.
ASR STEREO / DVD
Put the breaker in the ON position to connect power to the aft stateroom stereo and DVD player.
SALON STEREO /
DVD
Put the breaker in the ON position to connect power to the salon stereo and DVD player.
TV ANTENNA
Put the breaker in the ON position to connect power to the TV antenna amplifier.
REFRIGERATOR
GALLEY
Put the breaker in the ON position to connect power to the galley refrigerator.
MACERATOR /
SPARE
Put the breaker in the ON position to turn on the macerator, if equipped. If not equipped with a macerator, this breaker is
a spare for future use.
PUMP FRESH WATER
Put the breaker in the ON position to turn on the freshwater pump and the freshwater tank gauge. The pump will turn on
automatically when a freshwater demand is actuated, i.e., opening a faucet, and will run at the speed required to maintain
water flow.
Downloaded
from
Cruisers
Owners
Forum
http://www.CruisersOwnersForum.com
