CRU QX310 v2, User Manual

Page: 12 / 12

Part Number: A9-000-0059 Rev. 1.2
©2019, 2020 CRU Data Security Group, LLC. ALL RIGHTS RESERVED. CRU
®
is a trademark of CRU Data Security Group (“CDSG”) and is
protected by trademark law.
Product Warranty
CDSG warrants this product to be free of significant defects in material and workmanship for a period of three years from the original date
of purchase. CDSG’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CDSG expressly disclaims all other warranties, including but not lim-
ited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to
the documentation and hardware. No CDSG dealer, agent, or employee is authorized to make any modification, extension, or addition to this
warranty. In no event will CDSG or its suppliers be liable for any costs of procurement of substitute products or services, lost profits, loss of
information or data, computer malfunction, or any other special, indirect, consequential, or incidental damages arising in any way out of the
sale of, use of, or inability to use any CDSG product or service, even if CDSG has been advised of the possibility of such damages. In no case
shall CDSG’s liability exceed the actual money paid for the products at issue. CDSG reserves the right to make modifications and additions
to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a home or commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.