DataPort DP10 Quick Start Guide
1 General Information
1.1 Identifying Parts
1.2 LED Behavior
LED
Color
State
Description
Drive Power
Green
Solid
The drive inside the carrier is powered on.
Blinking
The fan on the rear of the receiving frame has failed. Please contact CRU
®
Technical Support.
Drive Activity
Amber
Blinking
The drive inside the carrier is being accessed by your computer.
2 Frame Installation
a. Slide the receiving frame into an open 5.25-inch bay.
b. Secure the receiving frame to the chassis with the four screws provided.
c. Attach a SATA data cable to the SATA port on the rear of the receiving frame and the other end to the
corresponding SAS or SATA port on the computer’s motherboard.
d. Attach a SATA power connector from your computer to the SATA power port on the rear of the
receiving frame. If no SATA power connectors are available, attach the included Molex-to-SATA
adapter cable to a Molex power plug. Then plug the SATA end of the adapter cable into the rear of
the receiving frame.
2
Front
Status Lights
and Keylock
Frame
Carrier
Rear
Cooling Fan
SATA Power and
Data Connectors
