CRU
U s e r M a n u a l f o r R A X Q R ( A9-210-0009) REV 1.0
- 11 -
g)
Click “Next” and then “Finish” to start the format process. When the format is complete, the Drive
Properties Box will update to show the new volume name. The new volume can now be found in My
Computer
9.2.3 Mounting and ejecting volumes
If the hard drives attached to RAX are already formatted, you can begin
using the volume right away. When the unit is properly connected and
turned on, a window may open to allow you access to the volume. If no
window appears, you can find the volume by double-clicking “My Computer.”
Eject the RAX before powering it down by single-clicking the green arrow icon on
the task bar, then selecting “Safely remove….” Windows will indicate when it is
safe to disconnect RAX. Disconnecting the unit without first ejecting it can result in data loss.
9.2.4 Creating a Boot Drive
Some PC motherboards support booting from an external device. To activate this feature, you will need
to adjust the motherboard’s BIOS settings. Check with your motherboard’s manufacturer or owner’s
manual for details.
Drive
Properties
Box
Device
Properties
Box
