3. lampholder (see Fig 5).
Avoid touching the glass surface of the bulb with bare skin as this
may reduce the life of the bulb. Only use 12V 10W G4 Halogen bulbs.
4. Carefully insert the glass lens into the inner ring and align
the three clips on the inner ring with the slots in the
lampholder. Gently press around the inner ring until it is
flush with the outer ring (see Fig 4).
Avoid using
excessive force as this may damage the lens or cause
injury.
5.
Please dispose of failed bulbs through appropriate
waste collection facilities.
Product Care
To retain the best quality finish, clean product regularly with a soft cloth and mild detergents. Do not
use abrasive or chemical cleaners as these will damage the product.
Do not position glass components in close contact with a heat source.
Do not strike glass with hard or sharp objects.
This product complies with the requirements of
•
European Parliament/Council Directive 73/23/EC the Low Voltage Directive amended by
European Parliament/Council Directive 93/68/EEC.
•
European Parliament/Council Directive 89/336/EEC on electromagnetic compatibility (EMC
Directive) amended by 91/263/EEC, 92/31/EEC and 93/68/EEC.
Applicable Standards with amendments:
•
BS EN 55-015
•
BS EN 61547
•
BS EN 60355-1
•
BS EN 60598-2-1
•
BS EN 61558-2-5
For details of the other items in the Croydex range please visit our website: www.croydex.com
Croydex Limited, Central Way, Andover, Hants, SP10 5AW, UK
Tel: +44 (0) 1264 365881. Fax: +44 (0) 1264 356437
Website:
E-mail:
CAB 059 R02
Outer ring
G4 Bulb
Lens
Inner ring
Fig 5
