3
Installation Guide
2. Place the bottom edge of the Hang ’N’ Lock bracket onto
the reference line and mark a screw hole position in each
cam hole recess. Remove the bracket from the wall.
1. Assemble the Hang ‘N’ Lock bracket sections making sure
all parts are slotted tightly together.
MIR 028 R02
4. With the Hang ’N’ Lock bracket loosely attached to the
wall, adjust for height and level by rotating the cams with a
flat head screwdriver, then use a Philips screwdriver to fully
tighten the mounting screws, to securely fix the bracket into
position.
3. Drill holes to a depth of 45mm and insert the wall plugs
level with the surface of the wall. (Note: if you are fitting the
product to a tiled surface, insert the wall plugs below the
surface of the tile to avoid cracking the tiles). Insert the
countersink screws through the Hang ‘N’ Lock cams and
loosely secure the Hang ‘N’ Lock bracket to the wall.
