Crown XTi 1000, Service Manual

Page: 12 / 167

CEquel Digital Systems Overview
Page 10 of 16
****************** Revision History *****************************************
Version 1.03
Supports command line calls. Writes error log. displays message when finished
Version 1.04
Added the word "Delay" in the title bar, so there is no confusion about the version to use.
The text also indicates that it's finalizing before it puts up that programming has completed
successfully after the 5 second delay. The Amplifier is almost through its rebooting process at
this point, but it's probably safe to shut down.
Version 1.06
When it is done uploading firmware, if the amplifier does not already have a serial number it
generates one using the Windows API function and sends it to the amplifier. If the Amplifier
already has a serial number, it reports that back as well.
Version 1.07
Fixes bug with USB version number if > 1.000. Supports both .bin and .hex file downloads.
NOTE: This loader only works with .hex files. DO NOT try to load .bnd or bin files with this utility.
Version 2.10
Supports both .hex and binary .s file downloads. The hex file is required for updating amps with
older firmware 1.0.22.0 and older. The serial number check and programming is done much
quicker in this version as well. This version will not allow you to download a hex file to an amp
with program version number 1.0.22 or later.
Where do I find all this stuff??
-The place to look for production released firmware is the ProductionProgrammingFiles folder.
This is where we store the released version of firmware for all products. It can also usually be
found in the forums section of the Crown web site (www.crownaudio.com)
-The next place to look would be my share drive. I usually keep beta firmware and different
versions of the CLoader Utility there.
//butler/ShareNew/CEquel_Files
- If you wish to run the System Architect Software application to monitor/control the devices, that
can be found either on my share drive or the HiQnet web site. The web site will only provide
“Released” versions of the software while my share most likely will have a beta version (read as
“buggy, use Beta at your own risk!!, operation NOT guaranteed”).
找资料学技术，故障求助 请到http://bbs.bjjdwx.com 海量维修资料免费下载