Power-Tech Series Power Amplifiers
Page 17
Reference Manual
5 Accessories
There are two accessories available at the time of this
printing: the
MT-XLR and the MT-BB.
Important: The
MT-XLR and MT-BB must be installed at a Crown
Factory Service Center or the Crown factory.
5.1 MT-XLR
The
MT-XLR is an accessory panel that provides two
standard 3-pin female XLR input connectors. The
MT-XLR accessory makes it easy to quickly change
connections in a system that uses standard XLR
connectors. It can also be used in systems that need to
daisy chain an input signal from one amplifier to another.
Because the
MT-XLR connectors are in parallel with the
amplifier’s built in phone connectors, an input signal fed
to either input can be fed to another amplifier from the
unused connector for that channel.
5.2 MT-BB
The
MT-BB is an accessory panel that provides barrier
strip input connectors. An
MT-BB accessory might be
desirable in applications requiring bare wire
connections. It can also be used to daisy chain an input
signal from one amplifier to another just like the
MT-XLR.
Fig. 5.2 MT-BB
Fig. 5.1 MT-XLR
