Operation Manual
I-Tech HD DriveCore Series
Power Amplifiers
page 42
7.7.18 Signal Generator
All channels share a
noise generator
that allows
noise to be mixed into the audio signal. This is useful
for noise masking applications and testing. Each
channel has the following controls:
•
Noise On/Off:
Turns the noise generator on or off.
•
Noise Type:
Selects full-spectrum white noise or
pink noise.
•
Master:
Sets the noise level with a fader.
The
sine-wave signal generator
lets you mix a
single tone into the audio signal. Its controls are listed
below:
•
Sine Frequency:
Sets the frequency anywhere
from 20Hz to 20kHz.
The noise generator and sine-wave generator cannot be
used at the same time.
7 Advanced Operation
Summary of Contents for DriveCore I-Tech 4x3500B HD
Page 72: ......
