Crown DCi 2 1250N Operation Manual Download | Manualshive

Page: 5 / 72

background image

DriveCore Install Network Series

Power Amplifiers

page 5

Operation Manual

Thank you for purchasing a new Crown DriveCore™ Install Network Series installation amplifier, one in a complete line of high-performance amplifiers based on exclusive

DriveCore technology. DriveCore Install Network Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide

system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-

efficient, DCi-N Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Features

• Exclusive multi-patented DriveCore™ Technology – The patented DriveCore integrated circuit combines hundreds of

discrete circuits into one chip for better performance, lower power consumption and improved reliability.

•  BLU link Digital Audio Transport – Up to 256 Channels of digital audio over Category 5e– cabling.
•  Configuration in HiQnet Audio Architect™
•  Programmable General Purpose Input/Output Control Port
•  Digital Signal Processing

Input/Output EQ Filters,

Crossover

Input/Output Delay

LevelMAX

TM

Limiters

•  Priority Input Router
•  PFC Power Supply-Universal PFC Power Supply for reduced current draw and provides industry leading efficiency.
•  Monitoring and Control over TCP/IP.
•  Real time Continuous Loading Monitoring.
•  Power Saving Modes – Power consumption in sleep mode is less than 1W.
•  Adjustable Auto Standby
•  Remote Power Off – Sleep mode activated via AUX port.
•  70Vrms/100Vrms Direct Drive – Each channel individually selectable for low-Z or high-Z operation.
•  Advanced Protection Circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched

loads, overheating, over- or under-voltage, and high frequency overload.

• Three Year, No-Fault Transferable Warranty – Your investment is fully protected.

• Complies with GreenEdge™ by HARMAN – Environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation.

How to Use This Manual

This manual provides you with the necessary information to safely and correctly setup and operate your Crown product. It does not cover every aspect of installation, setup

or operation that might occur under every condition. For additional information, please contact technical support, your system installer or retailer.

We strongly recommend you read all instructions, warnings and cautions contained in this manual. Also, for your protection, please send in your warranty registration card

today. And save your bill of sale — it’s your official proof of purchase.

Welcome

«
...
3
4
5
6
7
...
»

Summary of Contents for DCi 2 1250N









































































Reviews:

No comments

Related manuals for DCi 2 1250N

Brand: XIEGU Pages: 16

Brand: Coda Pages: 15

Brand: Monacor Pages: 34

Brand: PCI Pages: 2

Valvestate VS230R

Brand: Marshall Amplification Pages: 7

Brand: Technics Pages: 100

Brand: NAD Pages: 12

Brand: Tekbox Pages: 10

Brand: Goldmund Pages: 14

Brand: DaytonAudio Pages: 4

Brand: Technalogix Pages: 55

Brand: Randall Pages: 6

Brand: Crunch Pages: 2

Brand: Audio Authority Pages: 2

99 Stereo Power Amplifier

Brand: QUAD Pages: 18

Musicbloc Master 300 iQ

Brand: VAC Pages: 18

Brand: Lab 12 Pages: 8

Brand: Jetter Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands