Optional Output Connectors for CE Series Amplifiers
Installation Guide (CEAS1/CEAS2).
page 2 of 2
CE Series Optional Output Connector Wire Locations
Red wire to relay K100 “ON” terminal (location A).
Orange wire to relay K200 “ON” terminal (location B).
Black wire to WP7 lug (location C).
P.O. Box 1000 Elkhart, IN 46515 Phone: (219) 294-8000 Fax: (219) 294-8250
Web Page: http://www.crownaudio.com
INSTRUCTIONS:
1.
Turn down level controls.
2.
Turn off amp.
3.
Unplug power cord.
4.
Remove the four T-15 torx-head screws from the top cover, and retain screws.
Remove top cover.
5.
Remove the two T-15 torx-head screws from the rectangular cover plate on the
back panel, and retain screws. Remove cover plate and discard.
6.
Install CEAS1/CEAS2 in back panel opening and affix with cover-plate screws.
7.
Attach wires to main PWA as follows (refer to the illustration above):
8.
Reinstall top cover.
9.
Connect wires to new output panel.
10. Plug in power cord.
11. Turn on amp.
12. Turn up the level controls to desired volume.
