Crown CE 2000, Reference Manual

Page: 39 / 52

Page 39
CE-Series Amps with an Attitude!
Handle Kit
Handles complement your amplifier’s appearance, aid in trans-
portation, and the placement or removal from racks. They are
available from Crown’s Parts Department (Part # 125489-1).
Tamper-Resistant Hole Plugs
Your CE-Series amplifier comes with a set of tamper-resistant
hole plugs, which allow you to “protect” the level controls
against unauthorized adjustment. To use, simply pull off the
control knobs from the front of the amp, and slip the hole plugs
into place (see Figure 5.4). The plugs should slide easily into
position, without forcing. Once in place, the plugs will help to
avoid most accidental or intentional tampering (some situa-
tions may require additional security measures).
To remove the hole plugs, simply pry the plug away from the
amplifier case using a small, flat-blade screwdriver. To help to
ensure adequate security, the plugs have been designed to
be more difficult to remove than to place into position. If nec-
essary, additional hole plugs can be purchased separately
from Crown’s Parts Department (Part # 103234-1).
Fig. 5.4
Tamper-
Resistant Hole
Plugs Installed
in a CE-Series
Amplifier
Store your knobs in a safe location should you need to make
level adjustments in the future.