CH/CL Series
Built for the serious contractor, Crown CH/CL Series amplifiers deliver
the features, flexibility and power required in high-profile commercial
applications.
C H 1 , C H 2 , C H 4 A m p l i f i e r s
CH amps offer both low and high impedance
outputs per channel, with each channel inde-
pendently capable of providing 4/8-ohm, 70V
or 100V operation. A 70-Hz high pass filter on
each channel provides low frequency rolloff
to eliminate step-down transformer saturation
when used in 70V and 100V distributed sys-
tems.
C L 1 , C L 2 , C L 4 A m p l i f i e r s
CL amps offer low-impedance compatibility for
applications where high-power, low-impedance loads
are the primary requirement. The CL Series models
provide 2-, 4-, and 8-ohm options per channel. Rear-panel level con-
trols for secure operation and precision detented level controls allow
for accurate level settings in many fixed installation applications.
Active crossover with signal routing available with optional System
Solution Topology modules (SST-SBSC and ScreenArray SSTs).
Features
• Rear panel detented level controls allow for accurate level settings and
secure operation.
•
“Contractor Correct” barrier strip output connectors allow for quick
and easy connection, regardless of the load.
• Accurate, uncolored sound with very low distortion for the best in
music and voice reproduction.
AMPLIFIERS
Model
I n p u t s
O u t p u t s
P o w e r O u t p u t *
2-ohm Dual
4-ohm Dual
8-ohm Dual
70/100V Dual
4-ohm
8-ohm
140V
200V
(per channel)
(per channel) (per channel)
(per channel)
Bridge
Bridge
Bridge
Bridge
CH1
2
2
---
450W
275W
300W
---
900W
600W
600W
CH2
2
2
---
660W
400W
600W
---
1,320W 1,200W 1,200W
CH4
2
2
1,400W
1,200W
600W
1,200W
---
2,400W 2,400W
---
CL1
2
2
560W
450W
275W
---
1,100W
900W
---
---
CL2
2
2
900W
750W
450W
---
1,950W
1,320W
---
---
CL4
2
2
1,400W**
1,200W
600W
---
2,800W**
2,400W
---
---
*Maximum average power in watts at 1 kHz with 0.05% THD. **+200V line voltage provides 1,800W (2 ohm stereo) and 3,600W (4 ohm bridge-mono).
