manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 92 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 92

92

4.1.3 Control buttons

The 5 control buttons (shown below) on the I-test front panel are used for navigation and the 

selection of functions, and are also used to increment and decrement values in certain contexts (e.g. 

entering the PIN code).

Figure 73: Control buttons

 i

The 

 icon will display the previous menu screen.

4.1.4 I-Test charging indicator

The charging indicator indicates the current charging status as follows:

•  Solid green – Running on External Mains Power
•  Solid Yellow - Running on internal battery
•  Solid red - Internal battery low

4.1.5 Test Status indicator

The test status indicator shows the current state of the test in progress or the result of the last test 

undertaken

•  Solid green:

 

Test Passed

•  Flashing Yellow:

  Test in progress

•  Solid red:

  

Test Failed

The status of the last test is also shown on I-Test front panel (see 

page 18

).

OK

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments