Crowcon I-Test User'S Operation Manual Download

Page: 108 / 125

108

4.5.3 Download I-Test activity log from I-Test to USB Memory stick

This option will download the I-Test activity log files from I-Test to a USB Memory stick.

I-Test action log files contain data to allow data management of the fleet of gas monitors as shown

page 61

With the memory stick correctly plugged in (see

page 106

), access the Main menu (see

page 93

From the Main menu use the arrow keys to highlight the Memory Stick icon

Press the

key. The Memory Stick Functions screen

will be displayed.

Use the

and

keys to highlight the Upload Activity Log icon

and press

. The

Activity Log Upload Status screen will be displayed

Figure 89:

Download activity log from USB memory stick function

When the upload is complete the success icon

will be displayed.

Before removing the USB Memory Stick from I-Test press

to return to main menu

screen. If the USB Memory stick is removed before returning to the main screen I-Test will

display an error that can then be cleared by pressing the

button.

It is recommended to download activity logs at regular intervals or the download process

may take an extended time.

20120731/15001559.AEL

13 May 2013 11:30:45

I-Test

13 May 2013 11:30:45

I-Test

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test

Manager

Configuring

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Search results

Summary of Contents for I-Test

Reviews:

Related manuals for I-Test

Brands by name

Popular brands

Crowcon I-Test, User'S Operation Manual

Search results

Summary of Contents for I-Test

Reviews:

Related manuals for I-Test

Brands by name

Popular brands