17
11 Specifications
•
Specifications are subject to change without prior notice.
Detection Method
Double PIR AND MW
Microwave Frequency
24.125 GHz
Power Input
9.6 to 16
Vdc
Current
Draw
Active:
24mA (±5%)
Standby:
21mA (±5%)
Temp Compensation
Yes, Dual slop temperature compensation
Alarm Period
2 sec (±0.5sec)
Alarm Outputs
Form C (NC, NO, Common)
28Vdc 0.1 A with 10 Ohm
Tamper Switch(s)
Two Switches
N.C 28Vdc 0.1 A with 10 Ohm Series protection resistors
Opens when cover is removed from unit’s base
Warm up Period
120sec (± 5sec)
LED Indicator
LED is ON during ALARM
RF Immunity
10 V/m plus 80% AM from 80 MHz to 2GHz
ElectroStatic Immunity
6kV contact, 8kV air
Transient Immunity
1kV
Operation Temp
-10ºC ~ +50 ºC (14°F ~ 122°F)
Dimensions
200mm x 86mm x 80mm (7.9” x 3.4” x 3.2”)
Weight
500gr. (1100 lbs)
European directives
RTTE directive:1999/5/EC
EMC directive: 89/336/EEC
Low Voltage directive: 73/23/EEC
RoHS directive: 2002/95/EC
European standards
requirements:
EN300 440-2
EN301 489-1
EN50130-4 +A1 +A2
EN61000-6-3+A11
EN60950-1
EN50131-1 / EN50131-2-4 / EN50130-5
USA & Canada
47CFR part 15, subpart C, section 15.245
47CFR part 15, subpart
RSS210
ICES-003
Protection Degree
IEC 60529: IP 65
alarm shop
