18
11 Specifications
Detection Method
PIR AND MW
Microwave Frequency
X-band (9.9GHz / 10.525GHz / 10.687GHz)
K-band (24.125 GHz)
Power Input
9.6 to 16
Vdc, 120 mA
Current Draw
Active:
24mA (±5%)
Standby:
21mA (±5%)
Temp Compensation
Yes, Dual slop temperature compensation
Alarm Period
2 sec (±0.5sec)
Alarm Outputs
Form C (NC, NO, Common)
28Vdc 0.1 A with 10 Ohm
Tamper Switch(s)
Two Switches
N.C 28Vdc 0.1 A with 10 Ohm Series protection resistors
Opens when cover is removed from unit’s base
Warm up Period
30sec (± 5sec)
LED Indicator
All LEDs are ON during ALARM
RF Immunity
10 V/m plus 80% AM from 80 MHz to 2GHz
ElectroStatic Immunity
6kV contact, 8kV air
Transient Immunity
1kV
Operation Temp
-35ºC ~ +55ºC (-31°F ~ 131°F)
Dimensions
160mm x 70mm x 45mm (6.9” x 2.8” X 1.8”)
Weight
210gr. (0.5 lbs)
European directives
RTTE directive:1999/5/EC
EMC directive: 89/336/EEC
Low Voltage directive: 73/23/EEC
RoHS directive: 2002/95/EC
European standards
requirements:
EN300 440-2
EN301 489-1
EN50130-4 +A1 +A2
EN61000-6-3+A11
EN60950-1
EN50131-1 / EN50131-2-4 / EN50130-5
USA & Canada
47CFR part 15, subpart C, section 15.245
47CFR part 15, subpart
RSS210
ICES-003
Protection Degree
IEC 60529: IP 65
* Specifications are subject to change without prior notice.
