7
7
/
8
”
COLD
INLET
HOT
INLET
13
/
16
”
max
l
Make sure that the hot and cold inlet pipes have been installed
correctly.
l
The inlet pipes should be perpendicular to the wall, have a
maximum length of 13/16”, are level and are 7
-
7/8” apart as
shown opposite.
l
Position the valve onto the wall and mark the position of the
fixing holes (x4).
l
Drill the fixing holes.
l
Mount the exposed valve to the wall using suitable fixings for the
wall construction.
l
Connect the hot and cold water supplies and main outlet.
l
Once valve is installed add
the
riser rail to the top outlet
. If
applicable,
to install the bottom spout remove the stop located at
the bottom of the valve and connect on/off lever then spout.
l
Turn on the water supplies and test all connections for
water leaks.
1
Installation
2
Installation
1/2" copper
1/2" copper
