3
Union Furniture
Step 4
c
Step 5
b
Note:
Basin waste and taps fittings when over tightened can
create stress within the basin material which may in time
cause the failure of the product. Waste fittings should be
carefully bedded in silicone and the back-nut hang tightened
an additional quarter turn using a suitable spanner is sufficient to
create the required water light seal. Care should also be taken
when fitting brassware to tap platforms in order to prevent similar
stress related failures.
Basin Installation
IMPORTANT:
All cut edges MUST
be sealed with water proof sealant
or exterior wood varnish..
a.
Carefully bed in the waste
using silicone only.
c.
Carefully position the basin
down onto the unit, ensure it is
centrally positioned and flush
at the back.
Carefully apply the silicone to
the top of the unit.
d.
Connect the tap and waste.
Apply silicone to the join
between the unit and wal, on
all 4 sides.
Leave silicone, 24 hours to dry.
b.
Carefully position the basin
down onto the unit, ensure it is
centrally positioned and flush
at the back.
Carefully apply the silicone
to the top of the unit.Repeat
drilling for 3 tap hole mixers.