Installation Instructions
2
Series # 14
Paper Holder – Towel Ring
Tools You Will Need
14-58-PC
14-58-SN
14-58-PN
14-58-BZ
Installation Instructions
For easy installation of your paper holder – towel ring you will need:
● To read all the installation completely before beginning.
● To read all warnings, care, and maintenance information.
Flat Head Screwdriver
Pencil
Drill
Philips Screwdriver
Level
14-58
1
Determine the handing of the accessory. If you would like to flip the bar, please
follow steps 2 – 3.
Slide the bar into the post and secure
it to the post using the philips head
screw.
Determine the location of the
accessory.
Mark drill holes in desired location.
Drive the wall anchors into the drilled
holes with a Phillips screwdriver.
Place the mounting bracket over the
wall anchors. Secure it to the wall using
the supplied screws.
Inside the post, remove the philips head
screw with a screw driver and slide out
the bar
.
locations
Drill 1/4" holes in marked locations.
Temporarily place the accessory on
the mounting bracket to check
alignment. If necessary, loosen the
screws and realign the mounting
Place accessory on the mounting
bracket. Secure it to the wall using
the bottom set screw.
bracket.