FUNCTION
INSTALLATION
INSTALLATION
First shut off your water heating system then. With your mains stop cock closed, open the
lowest hot and cold taps in the house and allow to run until the cold storage tank and pipes are
empty (the hot water storage cylinder always remains full).
Fitting isolating valves to the inlet feeds is recommended for ease of maintenance.
Screw the Z-connector (4) to the pipe installation (hot and cold water entrances) checking the
hermetic holding.
Pre-screw the cover (3) on the Z-connectors (4). Connect the mixer (1), inserting the filter (2)
in the nuts and screw them on the Z-connectors, checking the hermetic seal. After having
connected the bath mixer body to the system, open the stopcocks and verify the correct
functioning of the mixer moving the handle in all the possible directions. Check the connection
seal.
Having first checked all new connections, turn on the mains stop cock, close all taps except the
new mixer and as the system starts to refill check for leaks. Once you have satisfied yourself
that there are no leaks, switch on the water heating.
INSTALLATION
Remember to turn off the mains water supply before connecting to any
existing pipe work.
ATTENTION
3
4
Hot Water
Cold Water
Open
EV1253EC
TEFLON
ENSURE THE SEAL OF
THE SYSTEM
4 -
2 -
3 -
1 -
DIMENSIONS
UNIT DIMENSIONS
milimeters
:
193
150±22
20
G
1/
2
"
67
175
